GRASS VALLEY KAYENNE - About Moving Currently Defined Sub-Levels; About E-M;EM Enables Tab

Advanced Operations
Insert External Device Control Commands in Macros
294
About Moving Currently Defined Sub-levels
CAUTION: : Moving a defined sub-level to another level while On-Air will
result in a loss of that resource.
Defined sub-levels can be taken by other levels. To prevent the accidental taking of sub-
levels, the GV Switcher menu will display a defined and delegated sub-level with ‘yellow’ if
the sub-level is assigned to another level. If you select the enable button for that sub-level,
it will be redefined to the current level and undefined from the previous level. If you then
select the
Update Sub Levels button, the current E-M/EM register will be modified.
About E-M/EM Enables Tab
The E-M/EM & Timeline, Timeline Edit, E-M/EM Enables menu tab allows the operator to
review and edit each M/E level in an E-MEM register, for all M/Es at once. Additionally, the
operator can view the states of all M/E sub-levels for an effect from one location. This is
sometimes preferable to performing these tasks one M/E at a time in the Master E-MEM tab.