Kayenne/Karrera/GV Korona
User Manual
187
• Source Selection.
Multi-Function Module Example
The following describes the Multi-Function Module organization:
• Function button row (top left), with four or six Keyer (Key 1, 2, etc.) buttons and Wipe 1
and Wipe 2 buttons for delegating to a keyer for the selected M/E.
• Below the function row is the main delegation area with buttons and status display:
• The first column (left) are radio buttons for delegating the M/Es, for example M/E 1,
M/E 2, M/E 3, and PGM.
• Adel button (right)—ON supports ‘Auto Delegation’ of this module when selecting
a source on a key bus, delegating a keyer in the bus control section of any Source
Select Module, selecting a keyer in any Next Transition section of any M/E, and
selecting Wipe 1 or Wipe 2 in any Transition Module,
• Last button (far right)—Toggles between current and previous delegation modes,
• HOME button (only displayed when not at the Home position)—Moves the display
to the top or ‘Home’ level,
Note: The HOME, Adel, and Last buttons change position in some
delegated modes, for example in Copy or Swap mode, these buttons
move from the main delegation area to the Multi-Function Module just
below the joystick.
• The other buttons in the main delegation area, when in the Home position,
delegate to: Keys, Masks, Mattes, i-DPM, e-DPM Wipe, Device, Copy, Swap, Source
Select, and Panel Preference. When pressed, the LEDs and buttons are delegated to
those modes and modifiers,
• Knob row with LEDs (middle-right) provides adjustment and display of parameters for
delegated functions,
• J
oystick (top-right) performs multiple functions depending on the delegation, for
example for keyers the joystick positions a delegated keyer (X,Y, and Z axis), but with
device control the joystick performs jog control operations (Up, Down, Fast Forward,
Rewind—center button performs Mark-In),
Note: The joystick can be calibrated from the MFM: from Home, press
PGM Panl
ME3
ME2 Keys Mask Matt iDPM eDPM Wipe
ME1 Adel Last
To Next Page
Loading...
