HBM MGCplus - Page 301

Keyword index
MGCplus A0534-30.0 HBM: public 301
M
Mains connection, Desktop housing, 31, 191, 232
Maintenance and cleaning, 30
Measured value band, 255
Measuring
pulses/frequencies, 174 - 177
Torque transducers, 151
Measuring with
Inductive transducers, 145 - 149
piezoresistive transducers, 179 - 182
Strain gages, 140 - 144
Menu, Pull-up menu, 112
Menu structure, 283
Menus, exit, 113
Messperiode, 249
Messraten-Trigger, 252
Messratentrigger, 253
Messreihen aufzeichnen, 248
Mode, 254, 257
O
Output stage module, AP01i and AP03i, 217, 227
P
Parameter set, 210
Peak-value memory, 202
"Envelope curve" operating mode, 207
"Instantaneous value" operating mode, 206
"Peak value" operating mode, 205
adjust, 202
combine, 203
control, 205
delete, 208
Turn off, 208
Periods, 231
Piezoelectric transducers, connect, 77
Piezoresistive transducers, 179, 182
connect, 78
Pin assignment, AP01i...AP14i, 88
Polynomial characteristic curve, Cubic, 125
Potentiometric transducers, 186
connect, 79
Pre-trigger, 258
Pulse counting, 75, 76
Pulse generators, connect, 75, 76
R
Recording, 106, 213, 231
Recording comments, 231, 260 - 264
Recording file, 259
Recording format, 260 - 264
Recording parameter set, 265
Recording parameters, 287, 288
Remote controls, 85
Assignment AP01i...AP14i, 89
Factory settings, 89
Function, 191
Replacing the communication processor, 26
Resistors, 172
PT10, 100, 1000, connect, 72
Rotational speed measurement
T10F-SF1, T10F-SU2 (symmetrical signals), 55
T10FS-SF1, T10FS-SU2 (symmetrical signals), 57
Rotational speed measurement with inductive
transducers, 61