221
Figure 201 Configuring ports
3. Configure the voice VLAN function on the two ports:
a. Select Network > Voice VLAN from the navigation tree.
b. Click the Port Setup tab to enter the page for configuring the voice VLAN function on ports.
c. Select Auto from the Voice VLAN port mode list, select Enable from the Voice VLAN port state
list, enter the voice VLAN ID 2, and select port GigabitEthernet 1/0/1 and GigabitEthernet
1/0/2 from the chassis front panel.
d. Click Apply.
To Next Page
Loading...
