Huawei Quidway S5600 Series - Page 634

Operation Manual - DHCP
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 2
DHCP Server Configuration
Huawei Technologies Proprietary
2-4
2.2 Global Address Pool-Based DHCP Server Configuration
2.2.1 Configuration Overview
Table 2-1 Configure global address pool-based DHCP server
Configuration task Remarks Section
Enable DHCP Required 2.2.2 “Enabling DHCP”
Configure global address pool mode
on interface(s)
Optional
2.2.3 “Configuring Global
Address Pool Mode on
Interface(s)
”
Configure to bind IP
address statically to
a DHCP client
Configure the
interface(s) to
operate in
global
address pool
mode
Configure to assign
IP addresses
dynamically
One among
these two
options is
required. Only
one mode can
be selected for
the same
global address
pool.
2.2.4 “Configuring How
to Assign IP Addresses in
a Global Address Pool
”
Configure DNS services for the
DHCP server
Optional
2.2.5 “Configuring DNS
Services for the DHCP
”
Configure NetBIOS services for the
DHCP server
Optional
2.2.6 “Configuring
NetBIOS Services for the
DHCP Server
”
Customize DHCP service Optional
2.2.7 “Customizing
DHCP Service
”
Configure the gateway IP address
for DHCP clients
Optional
2.2.8 “Configuring
Gateway Addresses for
DHCP Clients
”
Configure the connection between
the DHCP global address pool and
the BIMS server
Optional
2.2.9 “Configuring
Connection Between a
DHCP Global Address
Pool and a BIMS Server
”