Huawei Quidway S5600 Series - Page 733

Operation Manual - QoS&QoS Profile
Quidway S5600 Series Ethernet Switches Chapter 1 QoS Configuration
Huawei Technologies Proprietary
1-21
Operation Command Description
Configure the queue
scheduling mode
queue-scheduler
{ strict-priority wrr
queue0-weight
queue1-weight
queue2-weight
queue3-weight
queue4-weight
queue5-weight
queue6-weight
queue7-weight }
Required
In WRR mode, if the weight
value of one or more
queues is set to 0, SP
algorithm is used for this or
these queues
By default, all the outbound
queues on the port adopt
the WRR queue scheduling
algorithm and their default
weight values are
1:2:3:4:5:9:13:15
Display the
queue-scheduling
mode defined globally
and related
parameters on the
switch
display queue-scheduler
Optional
You can execute the
display command in any
view
Table 1-15 Configure queue scheduling in Ethernet port view
Operation Command Description
Enter system view
system-view
—
Enter Ethernet port
view
interface interface-type
interface-number
—
Configure the queue
scheduling mode
queue-scheduler wrr
queue0-weight
queue1-weight
queue2-weight
queue3-weight
queue4-weight
queue5-weight
queue6-weight
queue7-weight
Required
In WRR mode, if the weight
value of one or more
queues is set to 0, SP
algorithm is used for this or
these queues
By default, all the outbound
queues on the port adopt
the WRR queue scheduling
algorithm and their default
weight values are
1:2:3:4:5:9:13:15
Display the
queue-scheduling
mode and related
parameters on the
switch
display queue-scheduler
Optional
You can execute the
display command in any
view