IAI TTA Series User Manual

Chapter 5 List of Parameters5.1 I/O Parameters
170
I/O Parameters
No. Parameter name
Default
value
(Reference)
Input range Unit Remarks
302
Physical output port
number to output function
selection 303
Common 0 0 ~ 599
Specify the port number to be assigned to the function of I/O
Parameter No. 49, “Output function selection 303”.
* If 0 is set, the function will be assigned to output port No. 303.
303
Physical output port
number to output function
selection 304
Common 0 0 ~ 599
Specify the port number to be assigned to the function of I/O
Parameter No. 50, “Output function selection 304”.
* If 0 is set, the function will be assigned to output port No. 304.
304
Physical output port
number to output function
selection 305
Common 0 0 ~ 599
Specify the port number to be assigned to the function of I/O
Parameter No. 51, “Output function selection 305”.
* If 0 is set, the function will be assigned to output port No. 305.
305
Physical output port
number to output function
selection 306
Common 0 0 ~ 599
Specify the port number to be assigned to the function of I/O
Parameter No. 52, “Output function selection 306”.
* If 0 is set, the function will be assigned to output port No. 306.
306
Physical output port
number to output function
selection 307
Common 0 0 ~ 599
Specify the port number to be assigned to the function of I/O
Parameter No. 53, “Output function selection 307”.
* If 0 is set, the function will be assigned to output port No. 307.
307
Physical output port
number to output function
selection 308
Common 0 0 ~ 599
Specify the port number to be assigned to the function of I/O
Parameter No. 54, “Output function selection 308”.
* If 0 is set, the function will be assigned to output port No. 308.
308
Physical output port
number to output function
selection 309
Common 0 0 ~ 599
Specify the port number to be assigned to the function of I/O
Parameter No. 55, “Output function selection 309”.
* If 0 is set, the function will be assigned to output port No. 309.
309
Physical output port
number to output function
selection 310
Common 0 0 ~ 599
Specify the port number to be assigned to the function of I/O
Parameter No. 56, “Output function selection 310”.
* If 0 is set, the function will be assigned to output port No. 310.
310
Physical output port
number to output function
selection 311
Common 0 0 ~ 599
Specify the port number to be assigned to the function of I/O
Parameter No. 57, “Output function selection 311”.
* If 0 is set, the function will be assigned to output port No. 311.
311
Physical output port
number to output function
selection 312
Common 0 0 ~ 599
Specify the port number to be assigned to the function of I/O
Parameter No. 58, “Output function selection 312”.
* If 0 is set, the function will be assigned to output port No. 312.
312
Physical output port
number to output function
selection 313
Common 0 0 ~ 599
Specify the port number to be assigned to the function of I/O
Parameter No. 59, “Output function selection 313”.
* If 0 is set, the function will be assigned to output port No. 313.
313
Physical output port
number to output function
selection 314
Common 0 0 ~ 599
Specify the port number to be assigned to the function of I/O
Parameter No. 60, “Output function selection 314”.
* If 0 is set, the function will be assigned to output port No. 314.
314
Physical output port
number to output function
selection 315
Common 0 0 ~ 599
Specify the port number to be assigned to the function of I/O
Parameter No. 61, “Output function selection 315”.
* If 0 is set, the function will be assigned to output port No. 315.
315
Physical output port
number to output function
selection 300 (Area 2)
Common 0 0 ~ 599
Specify the port number to be assigned to the function of I/O
Parameter No. 331, “Output function selection 300 (Area 2)”.
* If 0 is set, the function will not be assigned to any port.
316
Physical output port
number to output function
selection 301 (Area 2)
Common 0 0 ~ 599
Specify the port number to be assigned to the function of I/O
Parameter No. 332, “Output function selection 301 (Area 2)”.
* If 0 is set, the function will not be assigned to any port.
317
Physical output port
number to output function
selection 302 (Area 2)
Common 0 0 ~ 599
Specify the port number to be assigned to the function of I/O
Parameter No. 333, “Output function selection 302 (Area 2)”.
* If 0 is set, the function will not be assigned to any port.
318
Physical output port
number to output function
selection 303 (Area 2)
Common 0 0 ~ 599
Specify the port number to be assigned to the function of I/O
Parameter No. 334, “Output function selection 303 (Area 2)”.
* If 0 is set, the function will not be assigned to any port.
319
Physical output port
number to output function
selection 304 (Area 2)
Common 0 0 ~ 599
Specify the port number to be assigned to the function of I/O
Parameter No. 335, “Output function selection 304 (Area 2)”.
* If 0 is set, the function will not be assigned to any port.
320
Physical output port
number to output function
selection 305 (Area 2)
Common 0 0 ~ 599
Specify the port number to be assigned to the function of I/O
Parameter No. 336, “Output function selection 305 (Area 2)”.
* If 0 is set, the function will not be assigned to any port.
321
Physical output port
number to output function
selection 306 (Area 2)
Common 0 0 ~ 599
Specify the port number to be assigned to the function of I/O
Parameter No. 337, “Output function selection 306 (Area 2)”.
* If 0 is set, the function will not be assigned to any port.
322
Physical output port
number to output function
selection 307 (Area 2)
Common 0 0 ~ 599
Specify the port number to be assigned to the function of I/O
Parameter No. 338, “Output function selection 307 (Area 2)”.
* If 0 is set, the function will not be assigned to any port.
323
Physical output port
number to output function
selection 308 (Area 2)
Common 0 0 ~ 599
Specify the port number to be assigned to the function of I/O
Parameter No. 339, “Output function selection 308 (Area 2)”.
* If 0 is set, the function will not be assigned to any port.
324
Physical output port
number to output function
selection 309 (Area 2)
Common 0 0 ~ 599
Specify the port number to be assigned to the function of I/O
Parameter No. 340, “Output function selection 309 (Area 2)”.
* If 0 is set, the function will not be assigned to any port.
325
Physical output port
number to output function
selection 310 (Area 2)
Common 0 0 ~ 599
Specify the port number to be assigned to the function of I/O
Parameter No. 341, “Output function selection 310 (Area 2)”.
* If 0 is set, the function will not be assigned to any port.
326
Physical output port
number to output function
selection 311 (Area 2)
Common 0 0 ~ 599
Specify the port number to be assigned to the function of I/O
Parameter No. 342, “Output function selection 311 (Area 2)”.
* If 0 is set, the function will not be assigned to any port.

IAI TTA Series Specifications

General

Brand	IAI
Model	TTA Series
Category	Robotics
Language	English