EasyManua.ls Logo

IAI TTA Series - Error List (MAIN Application)

IAI TTA Series
378 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 6 Error List 6.2 Error List (MAIN Application)
207
6.2 Error List (MAIN Application)
(In the panel window, the three digits after “E” indicate an error number.)
Error No. Error name Description, action, etc.
205 Update system software version error (IAI protocol)
An update was tried to an old version of system software that has no compatibility.
Check such information as the compatibility of the system software and the hardware, and try the
steps for updating again from the start.
207 Update file name error (IAI protocol)
The name of the update program file selected in the update mode is invalid. Select the correct file
and repeat the update procedure from the beginning.
208 Time data error
[Detail & Cause]
An error is occurred on clock data to be indicated in such as communication.
[Countermeasure]
Check the communication message and so on.
228
Calendar clock lost error
(RTC oscillation stop detection)
[Detail & Cause]
Clock data is lost due to power voltage drop in calendar IC.
[Countermeasure]
Establish the clock setting again.
229 RTC device access error
[Detail & Cause]
It is a data access error to the RTC device.
[Countermeasure]
In case the same error occurs even after power reboot, there is a concern of noise disturbance or
component malfunction.
22A RTC device access error
[Detail & Cause]
It is a clock data error off the calendar function. It also occurs when the power voltage in calendar
IC is dropped.
[Countermeasure]
Establish the clock setting again. In case the same error occurs even after clock setting is
established, there is a concern of noise disturbance or component malfunction.
22D Error in number of maintenance information change
[Detail & Cause]
There is an error in the number of maintenance information change to be indicated in such as
communication.
[Countermeasure]
Check the communication message and so on.
22E Maintenance information type error
[Detail & Cause]
There is an error in the maintenance information type to be indicated in such as communication.
[Countermeasure]
Check the communication message and so on.

Table of Contents