Chapter 5 List of Parameters5.3 Axis-Specic Parameters
186
Axis-Specific Parameters
No. Parameter name
Default
value
(Reference)
Input range Unit Remarks
221
Total movement count
target value
Common 0 0 ~ 99999999 time
Alert function is invalid when maintenance information alert
function setting is 0.
231: “Movement counts target value violation” will be generated if
“Total movement counts” in the maintenance information exceeds
the setting of this parameter.
222
Total operated distance
target value
Common 0 0 ~ 99999999 m
Alert function is invalid when maintenance information alert
function setting is 0.
232: “Operated distance target value violation” will be generated if
“Total operated distance” in the maintenance information exceeds
the setting of this parameter.
223
to
250
(For extension) Common 0 ~
To Next Page
Loading...
General