PROPULSION / ENGINE 16-9
CHANGE C2 ICON A5 / MAINTENANCE MANUAL
seated solidly. Mark 270°-check mark an oil pump housing to
control tightening of oil filter.
VERIFICATION METHOD:
Inspect the engine for oil, fuel, or coolant leaks and repair as necessary.
RELATED INFORMATION:
"Approved Engine Coolant Grades and Capacity" on page 2-29
"Install Engine" on page 16-21
"Install Exhaust System" on page 16-51
"Grease Coil Pack Connections" on page 16-39
"Install Fuse Box and Regulators" on page 16-89
"Install Fine Fuel Filter" on page 10-33
16.1.3.2 ECU Troubleshooting
Use the following table for ECU error message diagnostics.
TASK INFORMATION:
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
Yes—Current, Rotax-approved mechanic or repair facility
Special Tools Required
See Rotax 912 iS Sport (912 iS 2) Line Maintenance Manual
Parts Required
See Rotax 912 iS Sport (912 iS 2) Line Maintenance Manual
Aircraft System and Number
13—Propulsion
Consumables
None
To Next Page
Loading...
