ICON A5 - Page 718

16-94 PROPULSION / PROPELLER
ICON A5 / MAINTENANCE MANUAL CHANGE C2
CHAPTER 16
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
Calibrated Torque Wrench
Parts Required
None
Aircraft System and Number
13—Propulsion
Consumables
None
TASK INSTRUCTIONS:
1. Assemble propeller per ‘PROPELLER ASSEMBLY’ task in the latest revision of Sensenich
Propellers document 3B0R5.
Please contact ICON Aircraft for proper propeller pitch setting before completion of this step.
VERIFICATION METHOD:
Verify proper torquing of clamping fasteners and proper pitch setting.
RELATED INFORMATION:
"Propeller Installation Onto Engine" on page 16-103
"Propeller—Minor Blade or Hub Repair" on page 16-104
16.2.4 Propeller General Maintenance
16.2.4.1 Propeller Inspection
Instructions for the inspection of the Sensenich propeller.
TASK INFORMATION:
Type of Maintenance
Line
Level of Certification
LSA-RM