9.10.2 Adjusting the brightness and contrast of images in the image pane
You can set the brightness and contrast of each of the images displayed in the image pane by adjusting the relevant
sliders in the brightness and contrast toolbar.
l Brightness refers to the overall lightness or darkness of an image. Increasing thebrightnessmakes every pixel in
the image lighter, and vice versa.
l Contrastis the difference inbrightnessbetween objects in an image. Increasing thecontrastmakes light areas
lighteranddark areas darker, and vice versa.
By default, the brightness and contrast toolbar is collapsed.
Note: The color and brightness controls are displayed only when images are displayed in the image pane, and not
when the loupe is in its default position in the right pane.
The contrast and brightness image controls are reset to their default values when selecting a different jaw, pushing
the loupe back to its default position, or when exiting the tool.
To adjust the brightness and contrast of the images in the image pane:
1.
Tap on the left edge of the image pane to display the brightness and contrast adjustment toolbar.
Figure 171: Brightness and contrast toolbar is collapsed
A brightness and contrast adjustment toolbar is displayed on each of the windows in the image pane. By default,
the brightness level is set to the lowest position and the contrast is set to the middle position.
iTero Element® 5D Plus User manual
© 2020 Align Technology, Inc. All rights reserved. 149
To Next Page
Loading...
