Table of contents
1 Introduction 1
1.1 Intended use 1
1.2 Benefits 1
1.3 iTero Element 5D Plus hardware 2
1.3.1 iTero Element 5D Plus wand 3
1.4 iTero Element 5D Plus software 4
1.5 Working with near infra-red imaging (NIRI) 5
1.5.1 Limitations 7
1.6 About this manual 7
2 Getting started 9
2.1 Assembling the iTero Element 5D Plus scanner 9
2.2 Logging in to the scanner for the first time 14
2.3 Registering the scanner – Make It Mine process 14
2.4 Working in Demo Mode 20
2.4.1 Exiting Demo Mode 25
3 Working with the iTero Element 5D Plus scanner 27
3.1 Logging in to the scanner 27
3.1.1 Resetting your password 30
3.1.2 Installing Windows security updates 32
3.2 Logging out of the scanner 33
3.3 Shutting down the scanner 33
3.4 Moving the scanner 34
3.5 User interface 35
3.5.1 Scanner toolbar 38
3.5.2 Touch-screen gestures 41
3.6 Defining the scanner settings 41
3.6.1 Defining the Computer settings 43
3.6.2 Defining the User settings 47
3.6.3 Defining the System settings 55
4 Starting a new scan 61
4.1 Applying a wand barrier sleeve 61
4.2 Starting the scan 63
iTero Element® 5D Plus User manual
© 2020 Align Technology, Inc. All rights reserved. vii
To Next Page
Loading...
