Figure 70: New Scan window showing an empty Rx and the progress toolbar at the top of the window
The New Scan window is made up of the following areas:
l Doctor: Displays the doctor’s name and license number.
l Patient: Enables you to display the name of the patient for which the treatment is prescribed, by adding a new
patient or by searching for an existing patient. If required, once the patient’s data is displayed, you can edit it, or
clear it from the New Scan window. For more information, see section 4.3
l Order: Enables you to define the details of the required treatment, for example, the case type.
l Scan Options: Enables you to:
o
Select whether to enable or disable capturing NIRI data in the current scan. For more information, see section
4.4.2.
o
Confirm that a new wand barrier sleeve has been attached. For more information, see section 4.4.3.
l Notes: Enables you to make specific notes regarding the patient’s treatment.
iTero Element® 5D Plus User manual
64 © 2020 Align Technology, Inc. All rights reserved.
To Next Page
Loading...
