Keba ServoOne User Manual

Image 7.97: “Hydraulic Motion profile” screen
ID Index Name Value Unit Description
2862 0 HYD_OpMode TAB4  Hydraulics:Operationmode
2840 11 CylValveSwSel TAB2  Functionselectorforthevalveswitchoverofthe
cylinder
Table 7.102: Operation mode setting
Reference values, ramps, valve positions, the respective waiting time of the table
index and the subsequent motion block can now be set in the motion block table.
ID No.: 0842.26B.5-01Date: 09.2020
ServoOne- Device Help
221
7 Control
Image 7.98: “Hydraulic motion block table” screen
Selecting the hydraulic control mode:
PressCon(0)=Pressure control
VolConPlim(1)=Volume flow rate control (pressure limited)
SpeedCon(2)=Speed control
PosCon(3)=Position control
NPumpCon(4)=Pump speed control
VolCon(5) = Volume flow rate control (without pressure control)
ID Index Name Unit Description
2860  HYD_ConMode  
2860 0...15 HYD_ConMode  Hydraulics:ControlMode
Hydrauliccontrolmode
Table 7.103: “Hydraulic - Control mode” parameters
Reference value (Pressure, volume, cylinder speed, cylinder position)

Keba ServoOne Specifications

General

Brand	Keba
Model	ServoOne
Category	Controller
Language	English