Keba ServoOne - Page 398

11.6.23.20Error22-27(emergencycode7305h)
Cause: Channel 1 Initialization, HIPERFACE, error status response: technical or
process error (inside encoder)
Suggested steps:
Please look at parameter (552) ENC_CH1_AbsEncStatus
Initializationencoder
channel1
l Errorduringtheinitializationroutinesof
encoderchannel1.
l Inanycaselookatinitoutputsinthemessage
windowoftheDriveManager.
l Themostcommoncauseoferroristhewiring
totheencoder.
11.6.23.21Error22-28(emergencycode7305h)
Cause: Channel 1 Initialization, HIPERFACE: error status response from encoder
with no error (error code 0)
Suggested steps:
No further information available. Please contact your service provider.
Initializationencoder
channel
l Thisisprobablyaninternalproblemofthe
encoder!
l Inanycaselookatinitoutputsinthemessage
windowoftheDriveManager.
ID No.: 0842.26B.5-01Date: 09.2020
ServoOne- Device Help
398
11 Alarms & warnings
11.6.23.22Error22-29(emergencycode7305h)
Cause: Channel 1 Initialization, HIPERFACE: CRC error in response from encoder
(communication error)
Suggested steps:
Please check the wiring of the encoder
Initializationencoder
channel1
l Errorduringtheinitializationroutinesof
encoderchannel1.
l Inanycaselookatinitoutputsinthemessage
windowoftheDriveManager.
l Themostcommoncauseoferroristhewiring
totheencoder.
11.6.23.23Error22-30(emergencycode7305h)
Cause: Channel 1 Initialization, HIPERFACE, response with error bit, status:
encoder communication error
Suggested steps:
Please look at parameter (552) ENC_CH1_AbsEncStatus
Initializationencoder
channel1
l Errorduringtheinitializationroutinesof
encoderchannel1.
l Inanycaselookatinitoutputsinthemessage
windowoftheDriveManager.
l Themostcommoncauseoferroristhewiring
totheencoder.