Keba ServoOne - Page 397

11.6.23.16Error22-23(emergencycode7305h)
Cause: Channel 1 Initialization, HIPERFACE: timeout error
Suggested steps:
Please check the wiring of the encoder
Initializationencoder
channel1
l Errorduringtheinitializationroutinesof
encoderchannel1.
l Inanycaselookatinitoutputsinthemessage
windowoftheDriveManager.
l Themostcommoncauseoferroristhewiring
totheencoder.
11.6.23.17Error22-24(emergencycode7305h)
Cause: Channel 1 Initialization, HIPERFACE: impossible COMMAND in response
from encoder
Suggested steps:
Please look at parameter (552) ENC_CH1_AbsEncStatus
Initializationencoder
channel1
l Errorduringtheinitializationroutinesof
encoderchannel1.
l Inanycaselookatinitoutputsinthemessage
windowoftheDriveManager.
l Themostcommoncauseoferroristhewiring
totheencoder.
ID No.: 0842.26B.5-01Date: 09.2020
ServoOne- Device Help
397
11 Alarms & warnings
11.6.23.18Error22-25(emergencycode7305h)
Cause: Channel 1 Initialization, HIPERFACE: CRC error in error status response
from encoder (communication error)
Suggested steps:
Please check the wiring of the encoder
Initializationencoder
channel1
l Errorduringtheinitializationroutinesof
encoderchannel1.
l Inanycaselookatinitoutputsinthemessage
windowoftheDriveManager.
l Themostcommoncauseoferroristhewiring
totheencoder.
11.6.23.19Error22-26(emergencycode7305h)
Cause: Channel 1 Initialization, HIPERFACE, error status response: encoder
communication error
Suggested steps:
Please look at parameter (552) ENC_CH1_AbsEncStatus
Initializationencoder
channel1
l Errorduringtheinitializationroutinesof
encoderchannel1.
l Inanycaselookatinitoutputsinthemessage
windowoftheDriveManager.
l Themostcommoncauseoferroristhewiring
totheencoder.