2WA/2NJ/2RK
7-491
F37X Abnormality detecting in the FAX Management
Department
(1) Initialize HDD and perform an operation check.
(FULL of U024) *
(2) U021 Main backup initialization is carried out and an operation
check is performed.
(3) Perform an operation check for DIMM Clear by U671.
* Notes(Since the received data are disappeared when they
remain, the cautions are required.)
(4) Exchange FAX_DIMM and perform an operation check.
* Notes
(5) Exchange Main PWB and perform an operation check.
(6) Exchange HDD and perform an operation check.
(7) Get USBLOG and contact to service headquarters.
* : Only HDD standard model
* Note Only model which has Flash for FAX data in Main PWB
When there is no Flash for FAX
data and the operation of the secu-
rity kit becomes OFF, it has to
change reading from HDD to SSD.
F38X Abnormality detecting in the authentication
authorized Management Department
(1) Initialize HDD and perform an operation check.
(FULL of U024) *
(2) U021 Main backup initialization is carried out and an operation
check is performed.
(3) Exchange Main PWB, and perform an operation check.
(4) Exchange HDD, and perform an operation check. *
(5) Get USBLOG and contact to service headquarters.
* : Only HDD standard model
F3AX,
F3BX,
F3CX,
F3DX,
F3EX,
F3FX,
F40X,
F41X,
F42X,
F43X,
F44X,
F45X
Abnormality detecting in the Entity Manage-
ment Department
(1) Initialize HDD and perform an operation check.
(FULL of U024) *
(2) U021 Main backup initialization is carried out and an operation
check is performed.
(3) Exchange Main PWB, and perform an operation check.
(4) Exchange HDD, and perform an operation check. *
(5) Get USBLOG and contact to service headquarters.
* : Only HDD standard model
F46X Abnormality detecting of a printer rendering
part
(1) Exchange Main PWB, and perform an operation check.
(2) Get USBLOG.(Depending on the (2)case, it is required to get
the print capture data.)
* : Only HDD standard model
* F46F is the abnormalities of a printer
process.
In recurring by specific printer data,
please give me cooperation at getting
the capture data and USBLOG.
F47X,
F48X
Abnormality detecting of an image editing pro-
cessing part
(1) Initialize HDD and perform an operation check.
(FULL of U024) *
(2) U021 Main backup initialization is carried out and an operation
check is performed.
(3) Exchange Main PWB, and perform an operation check.
(4) Exchange HDD, and perform an operation check. *
(5) Get USBLOG and contact to service headquarters.
* : Only HDD standard model
Num-
ber
Contents Verification procedure / check point Remarks
To Next Page
Loading...
