Kyocera TASKalfa 8002i - Page 1353

2WA/2NJ/2RK
7-493
F5FX Abnormality detecting in a service execution
part
(1) Initialize HDD and perform an operation check.
(FULL of U024) *
(2) U021 Main backup initialization is carried out and an operation
check is performed.
(3) Exchange Main PWB, and perform an operation check.
(4) Exchange HDD, and perform an operation check. *
(5) Get USBLOG and contact to service headquarters.
* : Only HDD standard model
Since the USB log immediately after
occurrence is needed for analysis,
please give me cooperation of the
acquisition.
F62X Abnormality detecting in a service execution
part
(1) Initialize HDD and perform an operation check.
(FULL of U024) *
(2) U021 Main backup initialization is carried out and an operation
check is performed.
(3) Exchange Main PWB, and perform an operation check.
(4) Exchange HDD, and perform an operation check. *
(5) Get USBLOG and contact to service headquarters.
* : Only HDD standard model
Since the USB log immediately after
occurrence is needed for analysis,
please give me cooperation of the
acquisition.
F63X Abnormality detecting in a device control sec-
tion
(1) Initialize HDD and perform an operation check.
(FULL of U024) *
(2) U021 Main backup initialization is carried out and an operation
check is performed.
(3) Exchange Main PWB, and perform an operation check.
(4) Exchange HDD, and perform an operation check. *
(5) Get USBLOG and contact to service headquarters.
* : Only HDD standard model
F68X Abnormality detecting in a storage device con-
trol section
(1) Initialize HDD and perform an operation check.
(FULL of U024) *
(2) U021 Main backup initialization is carried out and an operation
check is performed.
(3) Exchange Main PWB, and perform an operation check.
(4) Exchange HDD, and perform an operation check. *
(5) Get USBLOG and contact to service headquarters.
* : Only HDD standard model
* F684 is overwritten error at operating
the HDD security kit.
* Initialize each SSD/HDD and
perform an operation check.
(SSD FULL of U024 / HDD FULL
of U024)
F69X,
F6AX,
F6BX,
F6CX
Abnormality detecting in a HyPAS-E part (1) Initialize HDD and perform an operation check.
(FULL of U024) *
(2) U021 Main backup initialization is carried out and an operation
check is performed.
(3) Exchange Main PWB, and perform an operation check.
(4) Exchange HDD, and perform an operation check. *
(5) Get USBLOG and contact to service headquarters.
* : Only HDD standard model
Num-
ber
Contents Verification procedure / check point Remarks