2WA/2NJ/2RK-1
8-54
YC3 5 MPF_LIFT_UP_S
ENS
I DC0V/3.3V MP upper lift sensor: On/Off
6 +5V2 O DC5V DC5V power output to MP upper lift sen-
sor
7 GND - - Ground
8 MPF_LIFT_DOW
N_SENS
I DC0V/3.3V MP lower lift sensor: On/Off
9 +5V2 O DC5V DC5V power output to MP lower lift sen-
sor
10 GND - - Ground
11 MPF_JAM_SENS I DC0V/3.3V MP paper feed sensor: On/Off
12 +5V2 O DC5V DC5V power output to MP paper feed
sensor
13 MPF_CL_REM O DC0V/24V MP paper feed clutch: On/Off
14 +24V2 O DC24V DC24V power output to MP paper feed
clutch
15 MPF_LIFT_DR_A O DC0V/24V MP lift motor: On/Off
16 MPF_LIFT_DR_B O DC0V/24V MP lift motor: On/Off
YC4 1 +24V2 O DC24V DC24V power output to Cleaning solenoid
2 ID_SOL_REM O DC0V/24V Cleaning solenoid: On/Off
YC5 1 TANK_SET - - Not used
2 +24V2_IL - - Not used
3 GND - - Not used
4 +24V2_IL I DC24V DC24V power input from Feed PWB
5 GND - - Ground
6 TRANS_MOT_RE
M
I DC0V/24V TRM: On/Off
7 TRANS_MOT_CL
K
I DC0V/
3.3V(pulse)
Transfer motor clock signal
8 TRANS_MOT_RD
Y
O DC0V/3.3V Transfer motor ready signal
9 TRANS_MOT_DI
R
I DC0V/3.3V Transfer motor drive switching signal
10 TRANS_MOT_BR
K
I DC0V/3.3V Transfer motor brake signal
YC6 1 TRANS_MOT_BR
K
O DC24V DC24V power output to Transfer motor
2 TRANS_MOT_DI
R
- - Ground
3 TRANS_MOT_RD
Y
O DC0V/24V Transfer motor: On/Off
Connec-
tor
Pin Signal I/O Voltage Description
To Next Page
Loading...
