2WA/2NJ/2RK-1
8-55
YC6 4 TRANS_MOT_CL
K
O DC0V/
3.3V(pulse)
Transfer motor clock signal
5 TRANS_MOT_RE
M
I DC0V/3.3V Transfer motor ready signal
6 GND O DC0V/3.3V Transfer motor drive switching signal
7 +24V2_IL O DC0V/3.3V Transfer motor brake signal
YC7 1 +24V2 - - Not used
2 DU_CL2_REM - - Not used
3 DU_OPEN I DC0V/3.3V Duplex cover switch: On/Off
4 GND - - Ground
5 DU2_B/ O DC0V/24V(pulse) Duplex motor 2 drive control signal
6 DU2_A/ O DC0V/24V(pulse) Duplex motor 2 drive control signal
7 DU2_B O DC0V/24V(pulse) Duplex motor 2 drive control signal
8 DU2_A O DC0V/24V(pulse) Duplex motor 2 drive control signal
YC8 1 +24V2 O DC24V DC24V power output to DU fan motor
2 DU_FAN_REM O DC0V/24V DU fan motor: On/Off
3 +24V2 - - Not used
4 DU_FAN_REM - - Not used
YC9 1 GND - - Ground
2 DU_SENS I DC0V/3.3V DU sensor 2: On/Off
3 +5V2 O DC5V DC5V power output to DU sensor 2
YC10 1 LOOP_SENS I DC0V/3.3V Loop sensor: On/Off
2 GND - - Ground
3 +5V2 O DC5V DC5V power output to Loop sensor
4 +3.3V2_ID O DC3.3V DC3.3V power output to ID sensor
5 REG_BK_LED O Analog ID sensor rear control signal
6 GND - - Ground
7 REG_BK_SENS1
_P
I Analog ID sensor detection signal
8 REG_BK_SENS1
_S
I Analog ID sensor detection signal
9 GND - - Not used
10 BELT_JAM_SENS - - Not used
11 +5V2 - - Not used
YC11 1 GND - - Ground
2 DU_ENTER_SEN
S
I DC0V/3.3V Duplex sensor 1: On/Off
3 +5V2 O DC5V DC5V power output to Duplex sensor 1
Connec-
tor
Pin Signal I/O Voltage Description
To Next Page
Loading...
