2WA/2NJ/2RK-1
8-82
Connec-
tor
Pin Signal I/O Voltage Description
YC1 1 ENG_TMG O DC0V/3.3V Timing signal
2 ENG_RDY O DC0V/3.3V Serial communication ready signal
3 ENG_SEL I DC0V/3.3V Serial communication select signal
4 ENG_CLK I DC0V/
3.3V(pulse)
Serial communication clock signal
5 ENG_SI I DC0V/
3.3V(pulse)
Serial communication data signal
6 ENG_SO O DC0V/
3.3V(pulse)
Serial communication data signal
7 DP_OPEN O DC0V/3.3V DP open/close sensor: On/Off
8 EN_FD_SW O DC0V/3.3V DP original feed sensor: On/Off
9 EN_SET_SW O DC0V/3.3V DP original sensor: On/Off
10 +3.3V3 I DC0V/3.3V DC3.3V power input
11 GND - - Ground
12 GND - - Ground
13 GND - - Ground
14 +24V I DC24V DC24V power output
15 +24V I DC24V DC24V power output
16 +24V I DC24V DC24V power output
YC2 1 3.3V O DC3.3V DC3.3V power output
2 GND - - Ground
3 LNG_SW I DC0V/3.3V DP original length sensor: On/Off
4 LNG_CLK O DC0V/
3.3V(pulse)
Sensor LED clock signal
5 GND - - Ground
6 SET_SW I DC0V/3.3V DP original sensor: On/Off
7 3.3V O DC3.3V DC3.3V power output
8 ANODE O DC3.3V DC3.3V power output
9 GND - - Ground
10 LF_DNSW I DC0V/3.3V DP lift lower limit sensor: On/Off
11 WIDE3 I DC0V/3.3V DP original width sensor: On/Off
12 WIDE2 I DC0V/3.3V DP original width sensor: On/Off
13 GND - - Ground
14 WIDE1 I DC0V/3.3V DP original width sensor: On/Off
YC4 A01 ANODE O DC3.3V DC3.3V power output
A02 GND - - Ground
A03 LF_UPSW I DC0V/3.3V DP lift upper limit sensor: On/Off
To Next Page
Loading...
