Kyocera TASKalfa 8002i - Page 1584

2WA/2NJ/2RK-2
9-4
KPDL auto switching P4 0: None
1: Auto switching
0
1(120V
model)
KPDL auto switching alternate
emulation
P5 Same as P1 (except 9) 6
AES option
Page eject command and action
when automatic emulation switch-
ing (AES) is triggered
P7 If the data is neither applicable to KPDL nor
alternate emulation after the AES is started, it
is processed in the alternate emulation .
0: All page eject commands
1: None
2: All page eject commands and Prescribe
EXIT command
3: Prescribe EXIT command only
4: ^L command only
6: Prescribe EXIT command and ^L command
If the data is neither applicable to KPDL nor
alternate emulation after the AES is started, it
is processed in KPDL.
10: Data other than KPDL print data is printed
in the alternate emulation.
10
11 (120V)
Command recognition character P9 ASCII code of 33 to 126 82(R)
Stacker setting at start-up R0 1: Main tray
7: When the 4000-sheet finisher is installed
1
7 (When DF-
7110 is
installed)
Paper size(start-up) R2 0: Size of the default paper cassette (See R4.)
1: Envelope Monarch
2: Envelope #10
3: Envelope DL
4: Envelope C5
5: Executive
6: Letter
7: Legal
8: ISO A4
9: JIS B5
10: ISO A3
11: JIS B4
12: Ledger
13: ISO A5
14: ISO A6
15: JIS B6
16: Envelope #9
17: Envelope #6-3/4
0
Items FRPO Setting value Factory set-
ting