Kyocera TASKalfa 8002i - Page 186

2NJ/2RK
2-137
18. Remove two screws (a)(M3×8) and remove the concealing lid (b).
Figure 2-255
19. Pass the vendor wire (a) through the aperture of IF mount (b).
20. Secure the vendor cable (a) with two screws (c) once removed in step 19.
21. Remove one screw (d)(M3×8) and fasten the earth terminal (e) of the vendor wire.
Figure 2-256
b
a
b
a
c
d
d
e