Kyocera TASKalfa 8002i - Page 518

2WA/2NJ/2RK
4-190
7. Remove nine screws (a)(M3x8).
8. Release two lower hooks (b) and
remove the rear lower cover (c).
Figure 4-280
9. Disconnect the connector (a) of the
developer motor.
10. Remove two screws (b)(M3x8).
11. Remove the duct connector mounting
plate (a).
12. Remove the screw (d)(M3x8).
13. Remove the duct (c).
Figure 4-281
b
a
a
a
c
14j0205
a
a
d
14
j
0441
b
b
a
c
e