Kyocera TASKalfa 8002i

2WA/2NJ/2RK
4-192
19. Remove two connectors (b) and five
tabs (c) from the main high-voltage
PWB (a).
Figure 4-284
20. Remove four screws (a).
21. Remove the main high-voltage PWB (c)
from three board spacers (b).
22. Check or replace the main high-voltage
PWB (c) and then reattach the parts in
the original position.
Figure 4-285
c
b
b
c
c
c
c
a
a
a
b
a
c