Kyocera TASKalfa 8002i - Page 598

2WA/2NJ/2RK
6-5
Opera-
tion sec-
tion /
Support
equip-
ment
U243 Checking the DP motor Drive the PF motor and solenoid
U244 DP switch check Drive the DP sensor
U245 Checking the message Check message
U246 Finisher adjustment Sets the finisher adjustment value
U247 Paper feed operation check Drives the PF motor and clutch
U249 Finisher line test Execute the 4000-sheet finisher operation test
Mode
Setting
U250 Set Maintenance Counter Pre-set Changes the preset value
U251 clearing the maintenance counter Displaying/clearing/changing the counter value
U252 Destination Sets the machine operation and indication
depending on the specification of the destination
U253 Switching the double/single counts Sets the counts system
U260 Switching the timing for copy count-
ing
Setting the count-up timing
U265 Setting by destination Sets the OEM code
U271 Setting the page count unit Set the long paper count unit
U278 Delivery date setting Register Delivery Date
U285 Set Service Status Page Setting the print coverage report output
U286 Optional language setting Add/delete/change the optional language
U287 Automatic recovery function Sets if there is an automatic recovery function
after error
U323 Abnormal temperature and humidity
notification setting
Switches the indication mode of the abnormal
temperature and humidity detection
U325 Paper interval setting Sets the print interval at high coverage
U326 Black line cleaning indication Switch the black line cleaning guidance indica-
tion
U327 Cassette heater control setting Selects the cassette heater control setting
U332 Adjusting the black coverage coeffi-
cient
Setting the coefficient of the custom size
U340 Setting the applied mode Selects the cassette heater control setting
U341 Printer cassette setting Sets the cassette to printer output only
U342 Paper eject control setting Sets/Releases the consecutive eject sheet limit
U343 Duplex priority mode Switches the duplex printing priority mode
U345 Setting the value for maintenance
due indication
Setting the maintenance timing display
U346 Selecting Sleep Mode Setting the BAM related sleep mode
Image
process-
ing
U402 Adjusting the printing margins Adjusts the scan image margins
U403 Adjusting margins for scanning an
original on the contact glass
Adjusts the margin for scanning originals
Section No. Maintenance item Outline