2WA/2NJ/2RK
6-47
Execution: Loop Sensor Control
1.Select the setting contents.
2.Select [On] or [Off].
3.Press the [Start] key and then fix the setting value.
Execution: Set Loop Sensor Valid
1.Select [On] or [Off].
2.Press the [Start] key and then fix the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Dis-
play
Description Initial setting
No.1 Sensor detection ON/OFF setting at 125 to 250 mm position than the
paper leading end
1 (On)
No.2 Sensor detection ON/OFF setting at 250 to 290mm position than the
paper leading end
1 (On)
No.3 Sensor detection ON/OFF setting at 300 to 330mm position than the
paper leading end
1 (On)
No.4 Sensor detection ON/OFF setting at 350 to 370mm position than the
paper leading end
1 (On)
No.5 Sensor detection ON/OFF setting at 400 to 410mm position than the
paper leading end
0 (Off)
No.6 Sensor detection ON/OFF setting at 450mm position than the paper
leading end
0 (Off)
Display Description Initial setting
Loop Sensor Valid Set if the loop sensor is or not. 1 (On)
To Next Page
Loading...
