Kyocera TASKalfa 8002i

2WA/2NJ/2RK-2
6-48
Contents
Execute the motor speed fine tuning.
Purpose
No need to change the basic settings. Change the set value when an image failure occurs.
Method
1.Press the [Start] key.
2.Select the item to adjust.
* :The screen for adjusting is displayed.
Setting: Motor1
1.Select the item to adjust.
2.The screen for adjusting is displayed.
3.Change the setting value by using [+] [-] key or the numeric keypad.
4.Press the [Start] key to set the setting value.
Setting: Motor2
1.Select the item to adjust.
* :The screen for adjusting is displayed.
2.Change the setting value by using [+] [-] key or the numeric keypad.
3.Press the [Start] key to set the setting value.
U053 Adjusting the motor speed
(Message:Adjust Motor Speed)
Items Contents
Motor1 Sets the Motor1
Motor2 Sets the Motor2
Motor3 Sets the Motor3
Motor1 Half Sets the Motor1 Half
Motor2 Half Sets the Motor2 Half
Motor3 Half Sets the Motor3 Half
Items Contents Setting range Data
varia-
tion
Initial setting
90
ppm
80
ppm
70
ppm
Drum(K) Adjusts the drum motor(K) -5000 to 5000 - 0 0 0
Items Contents Setting range Data
varia-
tion
Initial setting
90
ppm
80
ppm
70
ppm
Dev(K) Adjusts the developer K -5000 to 5000 - 0 0 0
Regist Adjusts the registration motor -5000 to 5000 - 24 24 27
Sep Belt Adjusts the transfer motor -5000 to 5000 - 0 0 0
V Feed Adjusts the middle conveying motor -5000 to 5000 - 18 18 20
Exit Adjusts the eject motor -5000 to 5000 - 42 42 50