Kyocera TASKalfa 8002i - Page 642

2WA/2NJ/2RK-2
6-49
Setting: Motor3
1.Select the item to adjust.
* :The screen for adjusting is displayed.
2.Change the setting value by using [+] [-] key or the numeric keypad.
3.Press the [Start] key to set the setting value.
Setting: Motor1 Half
1.Select the item to adjust.
2.The screen for adjusting is displayed.
3.Change the setting value by using [+] [-] key or the numeric keypad.
4.Press the [Start] key to set the setting value.
Items Contents Setting range Data
varia-
tion
Initial setting
90
ppm
80
ppm
70
ppm
SB Adjusts the eject motor -5000 to 5000 - 42 42 49
Fixing Adjusts the fuser motor -5000 to 5000 - -66 -103 -121
Decal Adjusts the conveying decurler motor -5000 to 5000 - 69 69 81
Bridge1 Adjusts the BR conveying motor 1 -5000 to 5000 - 44 44 52
Bridge2 Adjusts the BR conveying motor 2 -5000 to 5000 - 44 44 52
Feed Adjusts the paper feed motor -5000 to 5000 - 16 16 18
Job Separa-
tor
Adjusts the JS eject motor -5000 to 5000 - 36 36 42
Mid Roller Adjusts the middle conveying motor -5000 to 5000 - 54 54 63
DU1 Adjusts the BR motor 1 -5000 to 5000 - -5 -5 -7
DU2 Adjusts the BR motor 2 -5000 to 5000 - -6 -6 -8
Bridge1 DF
High
Adjusts the BR conveying motor 1 -5000 to 5000 - 0 0 0
Bridge1 DF
Low
Adjusts the BR conveying motor 1 -5000 to 5000 - 0 0 0
V Feed Adjusts the middle conveying motor -5000 to 5000 - 0 0 0
Exit Adjusts the eject motor -5000 to 5000 - 0 0 0
Items Contents Setting range Data
varia-
tion
Initial setting
90
ppm
80
ppm
70
ppm
Drum(K) Adjusts the drum motor(K) -5000 to 5000 - 0 0 0