Kyocera TASKalfa 8002i - Page 643

2WA/2NJ/2RK-2
6-50
Setting: Motor2 Half
1.Select the item to adjust.
* :The screen for adjusting is displayed.
2.Change the setting value by using [+] [-] key or the numeric keypad.
3.Press the [Start] key to set the setting value.
Setting: Motor3 Half
1.Select the item to adjust.
* :The screen for adjusting is displayed.
2.Change the setting value by using [+] [-] key or the numeric keypad.
3.Press the [Start] key and then fix the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Items Contents Setting range Data
varia-
tion
Initial setting
90
ppm
80
ppm
70
ppm
Dev(K) Adjusts the developer K -5000 to 5000 - 0 0 0
Regist Adjusts the registration motor at half
speed
-5000 to 5000 - 47 47 55
Sep Belt Adjusts the transfer motor -5000 to 5000 - 0 0 0
V Feed Adjusts the middle conveying motor at
half speed
-5000 to 5000 - 35 35 40
Exit Adjusts the eject motor at half speed -5000 to 5000 - 85 85 98
Items Contents Setting range Data
varia-
tion
Initial setting
90
ppm
80
ppm
70
ppm
SB Adjusts the eject motor at half speed -5000 to 5000 - 84 84 97
Fixing Adjusts the fuser motor at half speed -5000 to 5000 - -207 -207 -242
Decal Adjusts the BR conveying decurler motor
at half speed
-5000 to 5000 - 138 138 162
Bridge1 Adjusts the BR conveying motor 1 at half
speed
-5000 to 5000 - 90 90 105
Bridge2 Adjusts the BR conveying motor 2 at half
speed
-5000 to 5000 - 90 90 105
Feed Adjusts the paper feed motor at half
speed
-5000 to 5000 - 31 31 37
Job Separa-
tor
Adjusts the JS eject motor at half speed -5000 to 5000 - 72 72 83
Mid Roller Adjusts the middle conveying motor at
half speed
-5000 to 5000 - 109 109 128
DU1 Adjusts the duplex motor 1 at half speed -5000 to 5000 - -11 -11 -12
DU2 Adjusts the duplex motor 2 at half speed -5000 to 5000 - -13 -13 -14