Kyocera TASKalfa 8002i

2WA/2NJ/2RK
6-86
Contents
Set the toner sensor control voltage so that the sensor output value becomes the target one in
initial developer.
Purpose
Execute automatically when exchanging the developer unit which includes the initial developer.
Execution
1.Press the [Start] key.
2.Select [Execute].
3.Press the [Start] key.
* : Start the initial developer setting and display the control voltage value of toner sensor.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance mode No. is displayed.
U130 Developer initial setting:
(Message: Set Toner Install)
Items Contents
K Toner sensor K control voltage value