Kyocera TASKalfa 8002i

2WA/2NJ/2RK-2
6-87
Description
Adjusts the toner sensor control voltage
Purpose
if control values are not correctly read out due to the developer unit EEPROM failure etc., set
manual adjustment and fix temporarily control value in manual.
Execution
1.Press the [Start] key.
2.Select the item to set.
* :The screen for setting is displayed.
Setting: Manual
1.Select the item to set.
2.Change the setting value by using [+] [-] key or the numeric keypad.
3.Press the [Start] key to set the setting value.
Method: Auto
1.The current setting is displayed.
Method: Mode
1.Select the item to set.
* :Initial setting: Auto (0)
2.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U131 Toner sensor control voltage adjustment
(Message: Adjust Toner Sensor Control Voltage)
Items Contents
Manual Toner sensor control voltage manual adjustment
Auto Toner sensor control voltage automatic adjustment
Mode Change manual adjustment/automatic adjustment
Items Contents Setting range Data
varia-
tion
Initial setting
90
ppm
80
ppm
70
ppm
Control(K) Toner sensor K control voltage 0 to 255 1 133 133 125
Items Contents
Default(K) Toner sensor K default control voltage
Control(K) Toner sensor K control voltage after correction processing
Items Contents
Manual Toner sensor control voltage manual adjustment
Auto Toner sensor control voltage automatic adjustment