2WA/2NJ/2RK
6-97
Setting: Upper limit
1.Change the setting value by using [+] [-] key or the numeric keypad.
2.Press the [Start] key and fix the setting value.
Setting: Minimum
1.Change the setting value by using [+] [-] key or the numeric keypad.
2.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Items Contents Setting range Data
variation
Initial
setting
Value Sets the upper limit of the toner applying
amount for each operation mode.
0 to 10.0 0.1% 2.0
Items Contents Setting range Data
variation
Initial
setting
Value Sets the toner putting width at the clean-
ing mode.
0 to 30 1mm 10
To Next Page
Loading...
