2WA/2NJ/2RK-1
6-116
Description
Sets the optional Coin Vendor connection.
Also, sets the details such as the operation mode and unit price when the coin vendor is
installed. (This is an optional device which is currently supported only by Japanese specification
machines.) (Support the Japanese specification only)
Purpose
Execute when a coin vendor is installed.
Execution
1.Press the [Start] key.
2.Select the item to set.
* :The screen for setting is displayed.
* : Not displayed when selecting Parallel Coin Vendor in U204.
Setting: On/Off Config
1.Select the item to set.
* :Initial setting: Off
2.Press the [Start] key to set the setting value.
3.Turn the power switch off then on. Wait more than 5 seconds between the power off and on.
Setting: No Coin Action
1.Select the item to set.
* :Initial setting: Off
2.Press the [Start] key to set the setting value.
U206 Sets the coin vendor
(Message: Set Coin Vendor Mode)
Items Contents
On/Off Config* Sets the presence or absence of the coin vender
No Coin Action Behavior when change runs out during copying
Price Copy unit price by size
Boot Mode Setting activation mode
Apl Charge Mode Extended charge unit
Items Contents
On The coin vender is installed
Off The coin vender is not installed
Items Contents
All Clear All clear at coin shortage
Auto Clear Auto clear at coin shortage
Off Do nothing at coin shortage
To Next Page
Loading...
