2WA/2NJ/2RK-1
6-115
Contents
Sets the optional key card or key counter connection.
Purpose
Execute when installing the key card or key counter.
Method
1.Press the [Start] key.
2.Select the item to set.
* :The screen for setting is displayed.
Setting: Device
1.Select the type of the optional counter.
* :Initial setting: Off
*1: Displayed when U206 On/Off Config is set to Off.
2.Press the [Start] key to set the setting value.
3.Turn the power switch off then on. Wait more than 5 seconds between the power off and on.
Setting: Message
1.Select the item to set.
* :Initial setting: Coin Vendor
2.Press the [Start] key to set the setting value.
3.Turn the power switch off then on. Wait more than 5 seconds between the power off and on.
Completion
Press the [Stop] key.
The screen for selecting a maintenance item No. is displayed.
U204 Key card/key counter setting
(Message: Set Key-Card/Key-Counter)
Items Contents
Device Sets the key card/key counter connection.
Message Sets the message indicated when the device is not installed.
Items Contents
Key-Card Key card installation
Key-Counter Key counter installation
Parallel Coin
Vender*1
Parallel Coin Vender installation
Off Not installed
Items Contents
Key Device Prioritized display of the key device on the login screen when multiple
devices are used.
Coin Vendor Prioritized display of the coin vendor on the login screen when multiple
devices are used .
To Next Page
Loading...
