2WA/2NJ/2RK
6-118
Setting: Apl
1.Select the item to set.
2.Change the unit setting value by using the [+] [-] key or the numeric keypad.
3.Press the [Start] key to set the setting value.
Setting: Boot Mode
1.Select the item to set.
* :Initial setting: Copy Service
2.Press the [Start] key to set the setting value.
3.Turn the power switch off then on. Wait more than 5 seconds between the power off and on.
Setting: Apl Charge Mode
1.Select the item to set.
* :Initial setting: Off
2.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Items Contents Setting range Initial setting
Apl1 Expanded charging unit 1 0 to 300 10
Apl2 Expanded charging unit 2 0 to 300 10
Apl3 Expanded charging unit 3 0 to 300 10
Apl4 Expanded charging unit 4 0 to 300 10
Apl5 Expanded charging unit 5 0 to 300 10
Items Contents
Normal Assign activation to normal mode
Copy Service Assign activation to copy service display
Items Contents
On The extended charge unit is used.
Off The extended charge unit is not used.
To Next Page
Loading...
