2WA/2NJ/2RK-2
6-119
Contents
Check the operation panel keys.
Purpose
Check the operation of all the keys and LEDs on the operation panel.
Method
1.Press the [Start] key to display execution window.
2.[Count 0] appears and the LED at the most left column in the operation panel is turned on.
3.Pressing the keys in order from the top at the row where the LED is lit, count increases one by
one. When pressing all the keys at the row and there is an LED at the next right side row, the
LED is lit.
* :The job separator LED is lit during execution and turns off when completing.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Contents
Set paper size used in side feeder.
Purpose
Change the setting when installing the side feeder or the size of paper used in the side feeder is
changed.
Setting
1.Press the [Start] key.
2.Select items to set.
* :Initial setting value: Letter (Inch specifications), A4 (Other specifications)
3.Press the [Start] key and confirm the setting value.
4.Turn the power switch off then on. Please wait at least 5 seconds or more between power off
and on
Completion
Press the [Stop] key.
* :Return back to maintenance mode number selection screen.
U207 Operation key check
(Message: Check Panel Key Operation)
U208 Setting the paper size for the side deck
(Message: Set Deck Paper Size)
Items Contents
A4 Paper size of the side feeder: A4
B5 Paper size of the side feeder: B5
Letter Paper size of the side feeder: Letter
To Next Page
Loading...
