2WA/2NJ/2RK-2
6-125
Contents
Displays the optional device serial number
Purpose
Specify the production lot from the serial number to make it help of investigation at problem
occurrence.
Method
1.Press the [Start] key.
* :Displays the serial number.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Contents
Sets destination of the punch unit for the finisher.
Purpose
Execute when installing the punch unit for the destination different from the main unit.
Setting
1.Press the [Start] key.
2.Select [Destination].
3.Press the [Start] key to set the setting value.
4.Turn the power switch off then on. Wait more than 5 seconds between the power off and on.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U230 Optional device serial number
(Message: Optional Device Serial No)
Items Contents
Finisher Displays the finisher serial number.
Booklet Displays the booklet folder serial number.
PF2 Displays the paper feeder 2 serial number.
PF3 Displays the paper feeder 3 serial number.
U234 Setting destination for punch
(Message: Set Punch Destination)
Items Contents
Auto Match the destination setting.
Japan Metric Japan metric
Inch North American inch specification
Europe Metric European metric
To Next Page
Loading...
