2WA/2NJ/2RK-2
6-126
Contents
Sets the stacking count of the main tray and middle tray.
Purpose
Execute when stacking failure occurs.
Method
1.Press the [Start] key.
2.Select [Main Tray] or [Middle Tray].
3.Change the setting value by using the [+] [-] keys or the numeric keys.
4.Press the [Start] key and confirm the setting value.
5.Turn the power switch off then on. Please wait at least 5 seconds or more between power off
and on
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U237 Finisher eject volume limit
(Message: Set Finisher Paper Stack Limit)
Items Contents Setting range Initial
Setting value
Main Tray Set the main tray stack capacity 0 to 1 0
Middle tray Set the middle tray stack capacity 0 to 1 0
Input value Main tray Center tray
0 4000 sheets 65 sheets
1 1500 sheets 30 sheets
To Next Page
Loading...
