2WA/2NJ/2RK
6-188
Setting: Threshold(Single)/(Multi)
1.Select the item to set.
2.By using [+] [-] or the numeric keys, change the setting value.
3.Press the [Start] key and then fix the setting value.
Method: Execute
1.Select [Execute].
2.Press the [Start] key. AC calibration is started.
Setting: On/Off Config
1.Select [On] or [Off].
* :Initial setting: Off
2.Press the [Start] key and then set the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Display Description Setting
range
Initial set-
ting
Threshold(Single) Paper conveying threshold setting 0 to 255 0
Threshold(Multi) Multi feed threshold setting 0 to 255 0
Display Contents
On Valid for the multi feed sensor.
Off Invalid for the multi feed sensor.
To Next Page
Loading...
