Kyocera TASKalfa 8002i - Page 783

2WA/2NJ/2RK-2
6-190
Setting: Time Interval
1.By using the [+] [-] keys or the numeric keys, change the setting value.
* :Setting is changeable in 10 count increments.
2.Press the [Start] key to set the setting value.
Setting: Mode
1.Select the item to set.
* :Initial setting: Normal
2.Press the [Start] key to set the setting value.
Setting: On/Sleep Out
1.Select [On] or [Off].
* :Initial setting: On
2.Press the [Start] key to set the setting value.
Setting: AP/NE
1.Select [On] or [Off].
* :Initial setting: On
2.Press the [Start] key to set the setting value.
Setting: Leaving Time
3.By using the [+] [-] keys or the numeric keys, change the setting value.
4.Press the [Start] key and then fix the setting value.
Items Contents Setting
range
Initial setting
Time(sec) Calibration interval 0 to 9999 480
Items Contents
Short 0: Executing the calibration : Short
Normal 1: Executing the calibration : Normal
Long 2: Executing the calibration : Long
Custom 3: Executing the calibration : Custom
Items Contents
On 1: Permitting Calibration
Off 0: Prohibiting Calibration
Items Contents
On 1: Permitting Calibration
Off 0: Prohibiting Calibration
Items Contents Setting
range
Initial setting
Time(min) Setting the sleep timer 0 to 480 60