Kyocera TASKalfa 8002i - Page 784

2WA/2NJ/2RK-2
6-191
Setting : Driving Time
1.Change the setting value by using the [+] [-] key.
2.Press the [Start] key and then fix the setting value.
Setting: Timing
1.Change the setting value by using the [+] [-] key.
2.Press the [Start] key and then fix the setting value.
Setting: Target Value
1.Select the item to set.
2.Change the setting value by using [+] [-] key or the numeric keypad.
3.Press the [Start] key to set the setting value.
Method: Calib
1.Select [Execute].
2.Press the [Start] key.
* :Calibration is started.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Display Description Setting range Initial set-
ting
Time(sec) Setting the drive normal timer 300 to 3000 (s) 300
Display Description Setting range Initial set-
ting
Time(sec) Setting the consecutive printing stan-
dard time
0 to 3600 s 0
Items Contents Setting
range
Initial setting
Thickness(K) Toner layer calibration (Black) 0 to 1000 115
Gamma(K) Light amount calibration (Black) 0 to 500 320
Items Contents
Execute Executes Full Calibration