MacDon M105 - Filter Part Numbers

MAINTENANCE AND SERVICING
If Fleetguard ES Compleat
®
is unavailable, use a coolant concentrate or prediluted coolant intended for use with
heavy duty diesel engines and with a minimum of the following chemical and physical properties:
• Is formulated with a quality nitrite free additive package.
• Provides cylinder cavitation protection according to fleet study run at or above 60% load capacity.
• Protects the cooling system metals (cast iron, aluminum alloys, and copper alloys such as brass) from corrosion.
The additive package must be part of one of the following coolant mixtures:
• Ethylene glycol or propylene glycol base prediluted (40–60%) heavy duty coolant.
• Ethylene glycol or propylene glycol base heavy duty coolant concentrate in a 40–60% mixture of concentrate with
quality w ater.
Water qua lity is impo rtant to the performance of the cooling system. Distilled, deio nized, or demin eralized water is
recommended for mixing with ethylene glycol and propylene glycol base engine coolant concentrate.
IMPORTANT:
Do NOT use cooling system sealing additives or antifreeze that contains sealing additives. Do NOT mix ethylene
glycol and propylene glycol base coolants. Do NOT use coolants that contain nitrites.
Filter Pa
rt Numbers
Table 5.16 M105 Filter Part Numbers
Filter Part Number
Engine Oil Filter MD #111974
Charge
Oil Filter
MD #112
419
31
Return Oil Filter MD #151975
32
Primary Fuel Filter Element
MD #111972
Fuel S
trainer Filter
MD #11
1608
Secondary Fuel Filter Element MD #166312
Fuel Filler Filter
MD #163989
Pri
mary Element (CAB)
MD #
42445
Primary Air Filter Element
MD #111954
Safety Air Filter Element MD #111955
31. Located on the r eturn m anifold, closer towards the rear o f the windrower.
32. Located on the return m anifold, closer towards the middle of t he w ind ro wer.
169890 200 Revision A