OPERATOR’S STATION
3.5 Seat Belts
The windrower is equipped with a seat belt on the operator’s and trainer’s seats.
WARNING
The seat belt can help ensure your safety if it is used and maintained.
• Before s tarting the engine, securely fasten your seat belt. Ensure that anyone occupying the trainee’s
seat is secured by a seat belt as well.
• Never wear a seat belt loosely or with slack in the belt system. Never wear the belt in a twisted condition
or pinched between the seat structural members.
To fasten seat belt (A):
1. Pull belt at right side completely across your body.
2. Push the metal eye (B) into the buckle (C) until it locks.
3. Adjust the position o f the belt as low o n your body
as possible.
To release seat belt (A):
4. Push the red button (D) in the end of the buckle.
5. Separate the buckle (C) and metal eye (B).
Figure 3.5: Seat Belt
A - Seat Belt
B - Metal Eye
C - Buckle
D - Red Button
169890 39 Revision A
To Next Page
Loading...
