MacDon M105 - 9 Cab Display Module (CDM) Error Codes

9 Cab Display Module (CDM) Error Codes
NOTE:
In the case of dual codes being shown for an item (primarily the solenoid valves), the fi rst code indicates a
SHORT CIRCUIT condition, while the second code indicates an O PEN CIRCUIT condition. IE. E41 would be a
SHORT in the Reel Aft solenoids (P55, P59), while E141 would indicate an OPEN circuit.
Codes CDM Display Description
E1
E2 RTCH NOT ALL
OWED
Return To Cu
t activated wit h the header off.
E3
E4
E5
E6 TEMP GAUGE SHORT Wiring / connection problem.
E7 SPEED STICK SHORT Wiring / connection problem.
E8 HEADER E
NABLE SHORT
Wiring /
connection problem.
E9
E10 CDM INT
ERNAL ERROR
Intern
al hardware or software problem.
E11 CDM POWER UP CDM Module did not power up correctly.
E12
E13 FUEL S OLENOID WCM Fuel sole noid output fa ult d etected.
Error Codes E14 to E23 not allocated
E24 E12
4
DEC
K SHFT RIGHT P95
Rig
ht Deck Shift solenoid P95 fault detected
E25 E125 DECK SHFT LEFT P96 Left Deck Shift solenoid P96 fault detected
E2
6
E27
E
28
E
128
T
ILT P2A
H
eader Tilt solenoid P2A (V2A) fault detected
E29 E129 TILT P4C Header Tilt solenoid P4C (V4C) fault detected
E30 E130 4 WAY VALVE P5A 4 Way valve solenoid P5A (V5A) fault detected
E31 E131 BYPASS VALVE P1 Bypass valve solenoid P1 (V1) fault detected
E32 E132 HEADER UP/DOWN P4A Header up / down solenoid P4A (V4A) fault detected
E33 E133 SCREEN CLEANERS Screen cleaner output fault detected
E34 E134 RIGHT STOP LAMP Right stop lamp output fault detected
E35 E135 LEFT STOP LAMP Left stop lamp output fault detected
E36 E136 RIGHT TURN LAMP Right turn lamp output fault detected
E37 E137 LEFT TURN LAMP Left turn lamp output fault detected
E38
E39
E40 E140 HIGH RANGE P5B H igh range solenoid P60 fault detected
169890 359 Revision A