SAFETY
8. MD #166454
a. General hazard pertaining to machine operation
and servicing.
b. CAUTION
To avoid injury or death from improper or unsafe
machine operation:
i. Read the operator’s manual and follow all
safety instructions. If you do not have a
manual, obtain one from your dealer.
ii. Do not allow untrained persons to operate
the machine .
iii. Review safety instructio n s with all
Operators annually.
iv. E nsure tha t all safety signs are installed
and legible.
v. Make certain everyone is clear of machine
before starting engine and during operation.
vi. Keep riders off the machine.
vii. Keep all shields in place and stay clear of
moving parts.
viii. Dise n gage heade r drive, put transmiss ion in
Neutral, and wait for all movement to stop
before leaving operator’s position.
ix. Shut off the engine and remove the key from
ignition before servicing, adjusting, lubricating,
cleaning, or unplugging machine.
x. Engage locks to prevent lowering of header or
reel be fore servicing in the raised posit ion.
xi. Use slow m oving vehicle emb lem and flashing
warning lights when operating on roadways
unless prohibited by law.
Figure 1.31: MD #166454
9. MD #166455
a. Explosion hazard.
b. WARNING
• Prevent serious bodily injury caused by:
• Explosive battery gases. Keep sparks and
flames away from the battery. Refer to
operator’s manual for battery boosting and
charging procedures.
Figure 1.
32: MD #166455
169890 20 Revision A