Overrule the set image shift for transaction print jobs
The transaction setup has attributes to define the image shift. (
Define the attributes of an IPDS
transaction setup
on page 117) From the control panel you can overrule the image shift definition
of a transaction setup. This is useful when you notice that variable data, such as names or
addresses, must be better aligned on the page.
Be aware that the image shift adjustments you do on the control panel are lost when you leave
the transaction printing mode.
[160] Change image shift of transaction print jobs on control panel
1. Touch [System]→[Transaction].
2. Bring transaction printing offline. (
Activate the transaction printing mode
on page 109)
The [Image shift] section shows the image shift as defined in the active transaction setup.
3. Make the changes in the [Image shift] section.
4. Bring transaction printing online.
Overrule the set image shift for transaction print jobs
Chapter 7 - Transaction printing
131
To Next Page
Loading...
Need help?
General