Create a variable data job
What is a variable data job
Variable data printing is used for direct marketing, advertising, and personalized letters.
PRISMAprepare and other document authoring tools allow for building personalized documents.
Variable data, for example names and addresses, are merged with fixed elements and saved as
multi-record documents
NR. NAME ADDRESS IMAGE
1 Jeff GB 12345 London IMG 12
2 Olaf NO 34567 Oslo IMG 34
3 Mieke NL 56789 Amsterdam IMG 56
4 Gina IT 45678 Rome IMG 78
5 Ulli DE 23456 Berlin IMG 90
[IMG]
[ADDRESS]
[NAME]
NO 34567
Oslo
Olaf
IT 45678
Rome
Gina
[213] Creation of personalized documents
The printer supports PDF/VT level 1 and PPML for variable data printing. PDF/VT follows the latest
PDF standards. (
PRISMAsync Print Server RIP (raster image processor)
on page 435) When the
printer receives a variable data job, it automatically distinguishes the record structure. Records
are handled and printed as sets. Records do not necessarily contain the same number of pages.
The number of pages per record depends on the length of the variable data in each personalized
document.
The printing of a variable data job is like the printing of a normal job.
• Print a proof.
• Print a range of records.
• Interrupt the printing after a certain record, and resume printing of the job later.
• Change the settings of the job. Be aware that when you change the settings of a variable data
job, the settings apply to all records of the job.
Convert a job to a variable data job
A large PDF job that has a record structure in itself—for example a file with multiple personalized
documents—can be converted into a variable data job via the job properties. This is helpful when
you want to print only a part of the document (one or more records).
[214] Variable data job
1. Select the job you want to convert.
2. Touch [Edit], or double tap the job.
3. Use the [Job type] function to select [Variable data].
Create a variable data job
172
Chapter 8 - Document printing
To Next Page
Loading...
Need help?
General