Learn about the printer status
Wake up the printer
When the printer is in sleep mode, you use the sleep button to wake up the printer.
[30] Sleep button
Printer status colors
The vertical status bar on the dashboard, the status LED on the control panel, and the operator
attention light show the same status color. PRISMAsync Remote Manager and PRISMAsync
Remote Control display the status color remotely.
You can change the warning time or disable warnings. Choose a warning time that gives you
sufficient time to prepare new media or to remove prints to prevent a printing stop. (
Adjust
control panel and warning time
on page 62)
[31] The status bar on the dashboard (1), the control panel (2) and the operator attention light (3)
Color
Action required
Green informs that there is no upcoming event.
Orange warns that there is an upcoming event, such as loading paper trays or re-
moving prints from the output trays.
4
Learn about the printer status
Chapter 4 - Getting started
57